Backup (Options Menu); Restore (Options Menu) - Siemens SIMATIC BATCH Operating Manual

Context help references
14.2 BCC menu commands
Requirements for running or releasing the command in the BatchCC:
● Installation of SIMATIC Logon.
● The user logged on in the BatchCC is a member of the Windows user group
"Extended_Logon_Administrator" or is a member of the "SIMATIC BATCH" Windows group
and is assigned the "super user" role.
Note
If you add a new Windows user to the Windows "Extended_Logon_Administrator" group,
the "Roles management" command in the "Options" menu of BatchCC is only activated for
use after another logon via the Options > Log off menu command.
If you do not use SIMATIC Logon, the user logged on in Windows is also used or permitted
as the user for the logon in the BatchCC. This user then has all the permissions of a user with
the super user role in SIMATIC BATCH. You cannot use the following functions in the "Options"
menu of BatchCC:
● Log off
● Permission management
● Roles management
14.2.5.4

Backup (Options menu)

Using this menu command, you can create a complete backup of your configured data, such
as libraries, master recipes, materials, user permissions etc. as a backup file.
The internal, compressed xml-Format "*.sbb" is available as the file extension.
If completed batches exist that have not yet been archived then you are informed in an info
dialog that you should archive these batches before making a backup.
You can restore the backup data in the BatchCC with the menu command Extras > Restore.
For this, the Batch database must be empty or not yet available.
Additional information
Security aspects (Page 75)
14.2.5.5

Restore (Options menu)

With this command, you can completely restore backed up recipe data from a backup file
(Options > Backup command) in *.sbb and *.xml formats.
1076
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA