Name:
Enter a name for the material.
Code:
Here, you enter a unique identification (for example, a company-internal code) for the material
in the form of a string. This code can be used to specify setpoint output and process value
input at the interface blocks IEPAR_PI, IEPAR_PO or IUNIT_BLOCK to identify the material
or product.
Use as input material and/or output material:
You can specify whether the material you have entered is an input material or an end product/
output material.
See also:
"Quality" tab (Materials) (Page 796)
14.1.8.3
"Change log" tab
All performed actions on this element are documented in tabular form in the "Change log" tab.
The following table columns are displayed:
● Date: The system enters the date and time.
● User: The system enters the logged on user.
● Action: The recorded actions to this element are displayed by the system. For example, an
action is "created, Name:IM_A, Version: 1.1, ID: 17" or "edited". The ID is generated by the
system and used for the assignment in the database.
● Computer name:Each action you perform is recorded with the entry of the computer name.
This is the name of the computer on which you initiated this action.
14.1.9
BCC tab
14.1.9.1
"Select formula or master recipe" dialog box (creating an order)
In this dialog, you select the recipe to be used or the formula to be used for a new batch to be
created.
The left window shows the folder structure with the released elements of your SIMATIC BATCH
plant it contains.
In keeping with the selection of a folder in the left window, the right window shows all lower-
level elements without a folder structure.
In this window, you can use filter rows to search for specific elements.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
797