Working With Libraries; How To Configure Library Operations - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.5 Recipes
9.5.5

Working with libraries

9.5.5.1

How to configure library operations

Configuring library operations
The schematic below is a recommended sequence for configuring a library operation in the
BATCH Recipe Editor. You manage library operations in BatchCC. All the other steps can be
made in the BATCH Recipe Manager.
Principle of the procedure
You create reusable library operations in the BATCH Recipe Editor
● For hierarchical recipes: as a structure of recipe phases (RPHs)
● For flat recipes: as a structure in substructures, recipe operations ROPs and recipe phases
(RPHs)
A library operation for hierarchical recipes is created for each specific unit class. The unit class
is referenced in the header of the library operation. When the unit is to be selected by
conditions, specify the conditions for the future unit in the library operation.
In the BATCH Recipe Editor, you store the library operations created in this way in the
"Libraries" folder in BatchCC using a menu command.
312
Reference to unit class
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA