Releasing Recipes For Testing - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.5 Recipes
Requirement
This is only possible when the recipe is edited with the elements step, transition and structure
elements along with the corresponding configuration of the recipe data (header).
Follow these steps in BATCH Control Center:
1. Select the recipe you want to validate (master recipe or library operation) in the tree.
2. Select the menu item Edit > Validation.
Result
A result display or error list is displayed that indicates whether or not the recipe header is
completed, whether materials exist, whether steps and transitions in the recipe are configured
and whether the normalized batch quantity is correct. Validation is also possible in the BATCH
Recipe Editor.
Note
If the recipe is open in the BATCH Recipe Editor, you can also jump to the part of the recipe
that caused the problem by double-clicking the entry in the error list. You can use the validation
control at any time. Validation does not change the recipe status.
External validation
Validation is possible based on modules that can be created and modified externally (plug-in
modules).
The
modules. How to register these modules and activate their functions in SIMATIC BATCH is
explained in the section "Working with externally created modules for validation (Page 319)".
9.5.6.3

Releasing recipes for testing

Requirement:
The requirement for this function is the validation of the recipe. The validity of the recipe is first
checked automatically when you start this command.
Follow these steps in BatchCC
1. Select the recipe (master recipe or library operation) in the tree.
2. Select the menu item Edit > Release for Testing.
Result: After it has been released, the recipe has the "Released for testing" status. This is
indicated by the following icon.
316
SIMATIC BATCH; Plugin Concept documentation describes how to program these
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA