Bcc Order (Batch) Properties Dialog Box; Add Batch" Dialog Box (Creating Batches) - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
The value for the reference quantity for quantity scaling is read from the master recipe used
and can only be changed there.
Minimum quantity of a batch:
The minimum quantity limits the concrete quantity downward. In batch scheduling the system
ensures that the quantity is not less than the value entered here.
The value for the lower limit of a batch is read from the master recipe used and can only be
changed there.
Maximum quantity of a batch:
The minimum quantity limits the concrete quantity upward. In batch scheduling the system
ensures that the quantity is not greater than the value entered here.
The value for the upper limit of a batch is read from the master recipe used and can only be
changed there.
Description of the product
The description of the product is read from the created material and can only be changed there.
14.1.7

BCC Order (Batch) Properties dialog box

14.1.7.1

"Add batch" dialog box (creating batches)

"Main characteristics" tab
You can create new batches in this tab. New batches are shown as a line in a list. If the list is
still empty, add a new batch with the "New" button. If you have called the function based on
an existing master recipe or a formula, the list contains a line in which the data of the base
object are entered and a unique name is displayed for the new batch. The batches generated
in this way are stored in an order and order category created by the system. You can edit the
batch properties or batch data in the individual columns. Fields that are released for editing,
are highlighted in white. You can open selection dialogs using buttons in the various fields.
Each batch contains the following properties:
● Name: Input of a new or change to an existing batch name. This batch name must be unique
within an order.
● "Parameters" button:
Opens a dialog with the tabs "Allocations", "Input material", "Output material", "Parameters"
and "Transfer parameters". The "Allocations" tab shows the unit recipes and their assigned
units in the master recipe used. You can edit the values in the columns "Unit", "Strategy"
and "At start". In the "Input material', "Output material", and "Parameters" tabs, you can
edit the setpoints for this batch.
● Status: For batches to be newly created, the system set the status planned.
790
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA