Siemens SIMATIC BATCH Operating Manual page 484

BATCH Control Center
9.9 Report creation and archiving of batch data
Limitations when importing and viewing archive files (XML formats)
The following limitations apply to the Directory, SQL server, and FTP server archiving methods:
● Archived batches in V7.0 format cannot be imported to any SIMATIC BATCH version.
● Archived batches in V7.0 SP1 format are subject to the following limitations for importing
and viewing in the viewer:
– XML archive was generated in versions SB V7.0.1 to SB V7.0.1.14 or in versions SB
– XML archive was generated in version SB V7.0.1.15 or higher or in version SB V7.1.1.6
– XML archive was generated in version SB V7.1.2. Descriptions of conditions in
● Archived batches in SB V7.0.8 format are subject to the following limitation for importing
and viewing:
– XML archive was generated in version SB V7.1.2. Descriptions of conditions in
● For archived batches in V7.1.2 format and higher, there are no limitations for the import
and the viewer for archived batches.
For the "PH" archiving method, there are no limitations with regard to the XML format.
484
V7.1.1 to SB V7.1.1.5. Condition mode is not displayed; conditions of transitions are not
displayed; descriptions of conditions in transitions are not displayed; properties such as
"Continue" and synchronization actions with SIMATIC IT (MES_SYNC_REQUEST) are
not displayed and the "Start allocation" property is not displayed.
or higher. Descriptions of conditions in transitions are not displayed.
transitions are not displayed; monitoring time and actual value for material and material
code are not displayed; new constructs from SB V7.1.2 such as jumps and command
steps are not displayed.
transitions are not displayed.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA