Recipe" Dialog Box - Siemens SIMATIC BATCH Operating Manual

● Sequence:Here, you select the actions for which the signatures must be entered in a
specific order per action (assuming that more than one signature is required per action).
● All at once: Signing all at once means that all the required electronic signatures must be
entered in an open signing dialog box before the operator action is taken.
Some operator actions on a gray background only work when they are signed all at once.
With actions that trigger underlying actions, the signing of operator actions must always be
performed all at once on one PC within a signing dialog. Not all at once means that several
signatures can be made individually on different PCs in different signing dialogs. The
operator action is executed only when all signatures have been entered.
● Roles: By clicking on this column, you open the "Configure roles" dialog box to select the
user roles for which the substitute will enter the signatures.
Configured roles
When you select an operator action in the top window, the configured user roles required to
provide an electronic signature are displayed in the required sequence in the bottom window.
"Edit Roles" button
Click this button to open the "Confiure roles" dialog. Here, you assign a user role to supply the
electronic signature for an operator action.
OK
Saves your entries and closes the dialog.
Cancel
Discards your entries and closes the dialog.
Help
Opens the online help for this dialog.
Additional information
Specifying electronic signatures (Page 375)
14.1.3.5

"Recipe" dialog box

In this dialog, you create new parameters on the recipe procedure level (recipe header
parameter), on the recipe unit procedure (RUP), and on the recipe operation level (ROP). A
connection to the new parameter is also created.
Depending the type of connection, source or destination, the following applies:
Source
Target
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
: Read the setpoint of the parameter.
: Write the process value to the parameter.
Context help references
14.1 Dialogs
763