Warning/Error - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
"Help" button
Opens the online help for this dialog.
14.1.2.3

Warning/Error

Introduction
In this dialog you specify project settings for warning and error messages.
Messages are displayed in separate dialogs in the "Extended batch information" dialog in
BatchCC.
Note
A distinction is made between warning and error for the hard disk memory property. The
distinction is that if the available hard disk memory space that was specified for an error is too
low, specific functions are locked in addition to the messages. In both cases, the text boxes
limit the possible values to the permitted range.
Number of batches per order/number of batches warning
Set the value for this property "Yes" and enter a value for the maximum number of batches
per order, above which a warning message will be displayed.
Database size warning / database size
Set the value for this property to "Yes" and enter a value for the database size, above which
a warning message will be displayed. The default setting is no warning message and a
database size of 4000 MB.
Validation: Always show warnings
If you use this property, the messages will be displayed even if only warnings and no errors
are found. Otherwise, the message is displayed only if there is an error, but it shows both errors
and warnings.
Report opening of write-protected recipes
Released recipes are read-only. If you use this property, you will be notified of this fact when
write-protected recipes are opened.
Note
Alternatively you can also highlight write-protected objects with other background colors.
732
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA