How To Edit A Hierarchical Recipe - Siemens SIMATIC BATCH Operating Manual

See also
Assignment of the unit with a flat recipe (Page 523)
Structure elements of recipes (Page 510)
Setting the properties of the recipe header parameters (Page 562)
Setting the properties of steps (Page 564)
Setting the properties for transitions (Page 570)
Validating recipes (Page 582)
Releasing a recipe for testing or production (Page 582)
Revoking a release (Page 583)
10.4.3

How to edit a hierarchical recipe

Procedure in the BATCH Recipe Editor:
1. Select the menu item Recipe > New > Hierarchical recipe (for a master recipe) or Library
element: Recipe operation.
Result: When you create a hierarchical recipe, a new editing window for an RUP is displayed
(editing level 1). When you create a recipe operation, a window is displayed with a basic
ROP structure (with start and end) (editing level 2).
2. In the case of a hierarchical recipe, first insert a recipe procedural element (Insert > Recipe
procedural element).
3. Assign the unit in the properties dialog for the recipe unit procedure (RUP). Use the
command "Properties" in the shortcut menu for RUP or the library operation ("Allocation"
tab).
Note
Always make the assignment of the unit before configuring the individual recipe steps. As
a result, only the phases actually available in the unit or that correspond to the unit
conditions are displayed for selection in the properties dialogs of the phases.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
The first RUP is displayed.
BATCH Recipe Editor
10.4 Creating recipes
521