Output Material" Tab (Procedure/Step/Formula/Batch Properties) - Siemens SIMATIC BATCH Operating Manual

Delete (in the dialogs for recipe procedure, RUP, ROP sequence, formula category):
You can delete a selected parameter line. Remember that this parameter can be a data source
or target.
Description of a referenced object:
In the dialogs for the steps with links to EOP, EPH or a library sequence, the linked object is
displayed here.
Description:
In the dialogs for the recipe procedure, the RUP and the ROP sequence, you can enter an
explanatory text.
Additional information
Specifying recipe limits (Page 567)
14.1.3.11

"Output material" tab (Procedure/Step/Formula/Batch properties)

The output materials are listed in the properties of the header (recipe procedure), the unit
recipes, the steps, the formula category, formula and batch.
For steps with a link to EOP, EPH or for operator dialogs, the entries are taken from the basic
engineering and for library sequences from the library object. Parameters can be created and
deleted in the other objects.
In the formula category, you can specify the parameters that are not specific to the procedure
as data structures. In the formula, you enter the "genuine" recipe values for the data structure.
Button for showing and hiding table columns
After the "Unit of measure" column listed below, there is an empty column with a button for
hiding or showing the following columns. This allows you to make the Parameters tab clearer
and simpler.
Button for printing parameters
Using a button in the table view, you can open a shortcut menu for printing the displayed
parameters. If you click the Print button in the shortcut menu, the table view along with the
parameters is output immediately to the default printer set in Windows.
If you click Print..., a Windows dialog opens in which you can select another printer set up in
Windows. After making a selection, click "OK" to print the parameters.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
777