Setting The Properties Of Steps - Siemens SIMATIC BATCH Operating Manual

BATCH Recipe Editor
10.4 Creating recipes
See also section: Relationship between header parameters, formula category and formula
(Page 297)
Electronic signatures
Operator actions relating to recipes can be signed. You configure electronic signatures in the
"ESIG" tab.
See also section: Specifying electronic signatures (Page 375)
10.4.6.4

Setting the properties of steps

Properties of the steps
In the object properties of the recipe procedure elements (RUP, ROP, NOP, RPH, SUB) you
define the material and production data (formula) and the parameters for each individual
element. The parameters for input materials, output materials and process parameters for the
recipe phases in the sequences are specified by assigning the recipe phase (of the type EOP,
EPH). Additional parameters can be added to these.
Procedure in the BATCH Recipe Editor
1. Open the master recipe.
2. Select a recipe procedure element.
3. Select the "Properties" command in the shortcut menu.
The "Properties of <stepname>" dialog opens.
The tabs contain all the properties that can or must be specified for the relevant recipe
procedure element.
4. Make the settings you require in the tabs and confirm with "OK".
564
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA