Materials; Permission Management - Siemens SIMATIC BATCH Operating Manual

③
Status display of batches
Available functions
● Creating a new production order (Page 350)
● Specifying the properties of a production order (Page 353)
● Adding batches to the production order (Page 354)
● Specifying the properties of a batch (e.g. quantity) (Page 355)
● Setting the Start mode for batch processing (Page 357)
● Displaying and modifying unit allocation if required (Page 358)
● Chaining batches (Page 359)
● Displaying the run time of a batch (Page 362)
● Working with overviews (Page 259)
● Status of the batches (Page 372)
9.1.5.6

Materials

Creating materials
To be able to use input and output materials in recipes and formulas, these must first be entered
in BatchCC.
Available functions
● Defining materials (Page 293)
● Changing the quality (Page 294)
9.1.5.7

Permission management

Setting up permission management
The permission management is set up by the system administrator. Here, you can specify the
user permissions of the user roles for specific computers and for specific units for all the
functions of BatchCC and the BATCH Recipe Editor. This is only possible if the PCS 7 SIMATIC
Logon software is installed. Without this additional product, every user in SIMATIC BATCH
has all permissions comparable with the "Super user" role.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Control Center
9.1 Starting and operating
277