Backup/Restore" Dialog - Siemens SIMATIC BATCH Operating Manual

If the action can only be completed when one or more unit candidates are activated or
deactivated, you will see the necessary information here and have the opportunity of confirming
or canceling the action.
Note
If a batch is released, canceling leads to canceling release: the batch is not released.
If you change setpoints, you cannot exit the parameter dialog with "OK". It is possible to cancel
the parameter dialog without changing parameter settings.
Unit
Name of the unit.
Unit name
Name of the recipe unit procedure in the batch.
Description
The activations/deactivations of the units still to be executed are displayed here:
● If activated: Unit was deactivated and must now be activated.
● If deactivated: Unit was activated and must now be deactivated.
14.1.9.3

"Backup/Restore" dialog

Introduction
In this dialog, you can generate or restore a complete backup of your configured data (libraries,
master recipes, production orders, materials, user permissions etc.) as an sbb file.
File selection field
You use the usual functions to navigate to the folder that contains the desired restore file (sbb
file) and mark the file.
Save/Find
Target/source path of the sbb file
File name
Name of the file that is to be restored.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
799