Ricoh M022 Service Manual page 1141

003 Bit Switch 3
bit 0 DFU
bit 1 DFU
bit 2 [PCL5e/c]: Legacy HP compatibility
Enable: Uses the same left margin as older HP models such as HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A") will be changed
to "<ESC>*r1A"
bit 3 DFU
bit 4 DFU
bit 5 DFU
bit 6 DFU
bit 7 DFU
1001 Bit Switch
004 Bit Switch 4 DFU
1001 Bit Switch
005 Bit Switch 5
Show "Collate Type", "Staple Type" and "Punch
Type" buttons on the operation panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type
bit 0
from the operation panel. The available Types will depend on the device and
configured options.
After enabling this BitSw, the settings will appear under:
"User Tools > Printer Features > System"
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Printer Service Mode
0 1
- -
- -
0: Disable 1: Enable
- -
- -
- -
- -
- -
- -
0 1
0: Disable 1: Enable
3
395