Ricoh M022 Service Manual page 1142

3. Appendix: SP Mode Tables
bit 1
bit 2
3
bit 3
bit 4
bit 5
bit 6
396
CÓPIA NÃO CONTROLADA
Multiple copies if a paper size or type mismatch
occurs
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to print
all copies even if a paper mismatch occurs.
Prevent SDK applications from altering the contents
of a job.
If this BitSw is enabled, SDK applications will not be able to alter print data. This is
achieved by preventing SDK applications from accessing a module called the "GPS
Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of SDK
applications on data.
[PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
Increase max number of the stored jobs to 1000
jobs.
Enable: Changes the maximum number of jobs that can be stored on the HDD via Job
Type settings to 1000. The default is 100.
DFU
Method for determining the image rotation for the
edge to bind on.
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
CÓPIA NÃO CONTROLADA
0: Disable
1: Enable
(Single
(Multiple copy)
copy)
0: Disable 1: Enable
0: Pattern3 1: Pattern1
0: Disable 1: Enable
(100) (1000)
- -
0: Disable 1: Enable