Saving Configuration Changes; Summary Of Configuration Changes Cli Commands - Avaya G450 Manual

Configuration overview

Saving configuration changes

When you make changes to the configuration of the Avaya G450 Media Gateway, you must
save your changes to make them permanent. The G450 has two sets of configuration
information:
Running configuration
●
Startup configuration
●
The G450 operates according to the running configuration. When the G450 is reset, the G450
erases the running configuration and loads the startup configuration as the new running
configuration. When you change the configuration of the G450, your changes affect only the
running configuration. Your changes are lost when the G450 resets if you do not save your
changes.
Enter copy running-config startup-config to save changes to the configuration of the
G450. A copy of the running configuration becomes the new startup configuration.
You can back up either the running configuration or the startup configuration to an FTP or TFTP
server on your network, or to a USB flash drive. You can restore a backup copy of the
configuration from the FTP or TFTP server or the USB flash drive. When you restore the backup
copy of the configuration, the backup copy becomes the new running configuration on the
G450. For more information, see

Summary of configuration changes CLI commands

Table 1: Configuration changes CLI commands
Command
copy running-config
startup-config
40 Administration for the Avaya G450 Media Gateway
Backing up and restoring configuration files
Description
Commit the current configuration, including Standard
Local Survivability (SLS) data, to NVRAM
on page 113.