Packet Sniffing - Avaya G430 Manual

Administering branch gateway
Hide thumbs Also See for G430:
Table of Contents

Advertisement

Monitoring applications
rtp-stat min-stat-win
rtp-stat qos-trap
rtp-stat qos-trap-
rate-limit
rtp-stat-service
rtp-stat thresholds
show rtp-stat config
show rtp-stat detailed
show rtp-stat sessions
show rtp-stat summary
show rtp-stat
thresholds
show rtp-stat
traceroute

Packet sniffing

The Branch Gateway packet sniffing service allows you to analyze packets that pass through
the Branch Gateway's interfaces. Packets are captured to a buffer based on criteria that you
specify. The buffer is then uploaded via FTP to a file that can be analyzed using the Ethereal
analysis tool.
The packet sniffing service on the Branch Gateway offers several advantages to the network
administrator. Since the capture file is saved in the libpcap format, which is the industry
standard, it is readable both by the S8300's Tethereal software, and by standard versions of
Ethereal for Unix, Windows, and Linux (see http://www.ethereal.com).
Note:
Ethereal is an open source application.
In addition, the Branch Gateway's packet sniffing service is capable of capturing non-Ethernet
packets, such as frame-relay and PPP. Non-Ethernet packets are wrapped in a dummy
Ethernet header to allow them to be viewed in a libpcap format. Thus, the Branch Gateway
allows you to analyze packets on all the interfaces of the device.
The Branch Gateway's packet sniffing service gives you full control over the memory usage of
the sniffer. You can set a maximum limit for the capture buffer size, configure a circular buffer
382
Administering Avaya G430 Branch Gateway
Command
Comments? infodev@avaya.com
Description
Set the RTP statistics minimum statistic window
Configure the RTP statistics application to automatically
send a QoS trap upon the termination of an RTP stream
in which one or more QoS event counters exceeded their
configured threshold
Configure the QoS trap rate limiter
Enable the RTP statistics application
Set thresholds for the RTP statistics applications
Display the RTP statistics application configuration
Display a detailed QoS log for a specific RTP session
Display RTP sessions QoS statistics
Display a summary of the RTP statistics
Display the configured RTP statistic thresholds
Display the results of UDP traceroutes issued by the
Branch Gateway VoIP engine per active RTP session
October 2013

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents