Sip Line Service - Avaya Communication Server 1000 Installation And Commissioning Manual

Card position
system slot
assignments
Slot 1–8
Slot 9–10
Slot 11–13
Slot 14
Slot 15

SIP Line Service

The PRI Gateway interacts with Session Initiation Protocol (SIP) line service to facilitate the
interactions with PSTN networks.
SIPL Package (417) must be enabled on the CS 1000 Call Server, which can reside on Linux
commercial off-the-shelf (COTS) servers, Common Processor Pentium Mobile (CP PM),
Common Processor Media Gateway (CP MG), and Common Processor Dual Core (CP DC)
cards. Both the SIP Line Gateway and Element Manager reside on the supported Servers.
To enable, install, and configure the SIP Line service, you must upgrade the Communication
Server 1000 systems.
For information about SIP line configuration, see Avaya SIP Line Fundamentals
(NN43001-508).
For information about SIP Line installation, see Avaya Linux Platform Base and Applications
Installation and Commissioning (NN43001-315).
Media Gateway 1000E PRI Gateway Installation and Commissioning
PRI Gateway usage for CS
1000E (Extended Media
Gateway PRI (MGP) package
418- not equipped)
Up to eight E1/T1 spans
Not used
DSP position 1 (96-port
daughterboard)
Assigned to DTR and XTD
(optional)
Assigned to DTR and XTD
(optional)
PRI Gateway usage for CS 1000E
(Extended Media Gateway PRI (MGP)
package 418- equipped).
Up to eight E1/T1 spans
DSP position 2 as follows:
* physical- the same 96 DSP DB used
in Slot 0
* physical - the same 128 DSP DB used
in Slot 0
* configured- 32-port DSP DBs (where
XTRK= DB32 on Slots 9 and 10)
DSP position 1 (96-port DSP DB)
DSP position 1 (128-port DSP DB)
DSP position 1 (128-port DSP DB)
Assigned to DTR and XTD (optional)
DSP position 2 (128-port DSP DB)
Assigned to DTR and XTD (optional)
SIP Line Service
March 2013 31