Usp - Frame Relay Interface - Avaya P330 User Manual

USP - Frame Relay Interface

For USPs configured with a frame relay interface, the USP dialog box
contains five tabs:
Frame Relay
The Frame Relay tab of the USP dialog box provides information about
the frame relay configuration of the USP.
Avaya P330 Manager User Guide
Table 7-10. USP Configuration - PPP Parameters (Continued)
Field
IPCP Status
Backup Interface
• Serial Port - Basic information abut the USP. For information on
the fields in the Serial Port tab of the USP - Frame Relay dialog
box, refer to “Serial Port” on page
• Advanced - Information about the channels that comprise the
interface. For information on the fields in the Advanced tab of the
USP - Frame Relay dialog box, refer to
• Frame Relay - Information about the frame relay configuration
on the USP.
• Sub-Interfaces
frame relays.
• DLCIs - DLCI information for the Channel Group.
Description
IP Control Protocol. The state of IPCP for this
PPP session. IP packets can only be transmitted
and received over the PPP session when the
IPCP status is Open. Possible statuses include:
• Open
• Not-Opened
The interface’s backup status. Possible statuses
include:
• Backup By - Interface x - The selected
interface is backed up by interface x.
• Backup Of - Interface x - The selected
interface is the backup interface for
interface x.
• N/A - The selected interface is not
participating in a backup scheme.
101.
- Information about the Channel Group’s sub-
WAN Configuration
“Advanced” on page 103.
108