Rep 12.7 Nip Roll; Repairs And Adjustments; Rep 12.8 Finisher Entry Sensor - Xerox VersaLink B7025 Service Manual

REP 12.7 Nip Roll

Parts List on PL 12.12
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Remove the compiler assembly, REP
3. Remove the pinch roll, Figure 1:
a. Raise the four springs (1) in the direction of the arrow.
b. Remove the four nip rolls (2).
Figure 1 Nip rolls removal
Replacement
The replacement is the reverse of the removal procedure.

Repairs and Adjustments

REP 12.7, REP 12.8
WARNING
GP 10. Disconnect the power cord
REP 12.1.
12.19.

REP 12.8 Finisher Entry Sensor

Parts List on PL 12.12
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the integrated office finisher,
2. Turn over the integrated office finisher.
3. Remove the bottom cover,
4. Remove the connector bracket,
a. Release the harness from the three clamps (1).
b. Disconnect the connectors (2).
c. Remove two screws (3).
d. Remove the connector bracket (4).
Figure 1 Connector bracket removal
April 2017
4-64 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 12.1.
PL 12.06 Item 1.
Figure 1:
Launch Issue