Rep 4.4.1 Corotron Wire - Xerox WorkCentre 5020 Service Documentation

4. When installing the Transfer Corotron Housing, insert the tabs of Transfer Corotron Hous-
ing into the square holes of the Corotron Bracket (Figure 7).
Initial Issue
WorkCentre 5020
Figure 7

REP 4.4.1 Corotron Wire

Parts List on PL 4.4
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Remove the Transfer Corotron Housing (REP 4.3.1).
2. Remove the Drum Cartridge (REP 4.1.1).
3. Remove the Inboard/Outboard Cover (Figure 1).
1 Remove the Inboard Cover in the direction of the arrow.
2 Release the tabs (2) to remove the Outboard Cover.
July, 2007
4-27
WARNING
Figure 1
Repairs and Adjustments
REP 4.3.1, REP 4.4.1