Replacement
1.
The replacement is the reverse of the removal procedure.
2.
Ensure the eject belt is aligned with the marks on the pulleys,
Figure 4 Eject belt installation
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 12.21 Eject Belt
Parts List on
Figure
4.
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the compiler assembly,
2.
Remove the front/rear tamper motor assembly,
3.
Move the eject home sensor assembly,
a.
b.
April 2017
4-83
PL 12.25
WARNING
REP
12.19.
Figure
Remove the screw (1).
Move the eject home sensor assembly (2).
Figure 1 Eject home sensor assembly
GP
10. Disconnect the power cord
REP
12.25.
1:
Repairs and Adjustments
REP 12.20, REP 12.21