Rep 12.15 Finisher Pwb - Xerox workcentre 5335 series Service Manual

Figure 2 Removing the Upper Chute Assembly
Replacement
1. Reverse the removal procedure for replacement.
NOTE: Ensure that the Paper Guides
Assembly.
Initial Issue
WorkCentre 5335 Family Service Documentation
(PL 22.6) are not folded back on top of the Exit Roll
BUS Updated 12/2011

REP 12.15 Finisher PWB

Parts List on PL 22.7
Removal
1. Switch off the power and disconnect the power cord.
2. Remove the Integrated Office Finisher from the machine
3. Turn over the Finisher.
4. Remove the Bottom Cover (PL
5. Remove the Finisher PWB (Figure
(1)Disconnect Connectors (12).
(2)Remove Screws (4).
(3)Remove Finisher PWB.
Figure 1 Removing the Finisher PWB
Replacement
1. Reverse the removal procedure for replacement.
07/2011
4-115
(REP 12.1).
22.2)
1):
Repairs & Adjustments
REP 12.14, REP 12.15