Replacing developer station
Replacing developer station
Note:
The developer stations listed for installation are the only ones permitted for this
configuration, and depend on the selected configuration.
To replace the developer station
[128]
Proceed as follows:
1.
The list with the work steps for replacing the developer station is displayed in
the right half of the window:
[309]
The steps in the list must be followed in sequence.
Detailed information on replacing the developer station:
Replacing the developer station — overview on page 217
Information on the icons displayed on the operator panel under 'Steps' can be
found under
2.
Click on the 'OK' button to complete the developer station replacement:
3.
Changing the photoconductor drum on page 243
242
Chapter 6 Operating the printing system
Explanation of icons on page
118.