Table of Contents
Advertisement
Empty developer station
Empty developer station
To prepare the developer replacement on the operator panel
[161]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
Select the 'VarioStream' 'Changing consumables' 'Replace developer' menu
on the operator panel.
3.
Click the 'OK' button to start the procedure.
Information on the icons displayed on the operator panel under 'Work-steps':
See
To vacuum up the developer
[162]
Proceed as follows:
1.
Open the left and center door at the back of the printing system.
2.
Replace the waste toner bottle with an empty one (see
toner bottle - overview on page
[411]
3.
308
Chapter 8 Replacing consumables
Explanation of icons on page
118.
332).
Set the rotary switch to the
"SERVICE" position.
Replacing the waste
Advertisement
Table of Contents
