Table of Contents
Advertisement
Empty developer station
Proceed as follows:
[415]
7.
8.
Click the 'OK' button to start vacuuming.
The developer is vacuumed out automatically.
9.
Repeat as needed. For this, click 'Yes' on the operator panel
When the developer has been completely removed, click 'No'.
[416]
10.
[417]
11.
310
Chapter 8 Replacing consumables
Move the lever to the right.
Move the lever to the left.
Remove the vacuum hose from
the vacuum opening and place
in the toner box.
Advertisement
Table of Contents
