Inserting paper web in paper input
Inserting paper web in paper input
To insert the paper web in the paper input
[67]
Proceed as follows:
[131]
1.
[132]
Note
If the paper web is wider or narrower than the paper web used previously:
Move the right guide washer so that the paper has some space (approximate-
ly 0.5–1 mm) to run between the two guide washers.
[133]
2.
[134]
3.
134
Chapter 6 Operating the printing system
Pull out the paper input lever
and turn to the right, to the stop
point.
The roller profiles are swiveled
up to the left and are in the pa-
per input position.
Position the start of the paper
web with the fold line to the
front between the roller pro-
files.
Push the paper into the paper
tray of the printing system man-
ually.