Table of Contents
Advertisement
Change toner bottle
Proceed as follows:
[448]
10.
[449]
11.
12.
Close the center door.
13.
Click the 'OK' button on the operator panel to complete toner bottle replace-
ment:
The consumable counter is reset.
Replacement of the toner bottle is documented in the 'Consumables history'
menu.
All units of the printing system are inspected (duration around two to three
minutes) before the printing system is switched to the 'Ready' status.
330
Chapter 8 Replacing consumables
Press the interlock lever of the
toner suction head down to
close the new toner bottle.
Push the handle back to swivel
the toner bottle holder into the
printing system to the stop
point.
Advertisement
Table of Contents
