Change Upper Sponge At Back Of The Capping Station - Oce CS9090 User Manual

Chapter 7: Maintenance
7.2.3.2

Change upper sponge at back of the capping station.

Power ON the printer and go to the "WiperClean-Menu". This will cause the unlocking of the
Step 1 :
carriage.
Remove the two screws fixing the sponge.
Step 2 :
Replace the sponge and tighten it again to the plate with the two screws.
Step 3 :
AP-75036 - Revision 1.3 – 20/03/06
1 Screws to remove the capping sponge from the plate
1 Capping sponge
2 Plate
156 User's Guide CS9000 series