Table of Contents
Advertisement
Proceed as follows:
[164]
6.
[165]
7.
[166]
Note
Depending on the paper used (with or without marks or fold perforation),
the paper web must be positioned accordingly.
Settings for different paper properties
If the new paper is different
a
from the old paper (with or
without guide holes), the spike
wheel (S) must be positioned
S
accordingly in all printing sys-
tems:
H
a: New paper with guide
holes:
Move the lever (H) fully to
the right and release. The
spike wheel is now in the
b
upper position.
b: New paper without guide
holes:
Move the lever (H) from its
left position fully to the
right and release. The spike
wheel is now in the lower
position.
Position the paper web pressure
pad:
a: For paper with guide
holes:
Push in the pressure pad to
the stop point
b: For paper without guide
holes:
Pull out the pressure pad to
the stop point.
145
Advertisement
Table of Contents
