Table of Contents
Advertisement
Proceed as follows:
[149]
Caution
If you push the loop puller roller down too quickly in the next step, the paper
web can tear.
[150]
10.
[151]
Caution
Risk of injury when closing the paper transporter.
Close the paper transporter using the blue-green handle only.
[152]
Caution
Danger of damage to the photoconductor drum.
In the next step, do not touch the photoconductor drum if you have to re-
move the paper by hand. A ring on your finger, in particular, could damage
the photoconductor drum.
11.
If the paper does not appear at the insert mark:
Swivel off the paper transporter.
Pull out paper by hand.
Take care not to touch the photoconductor drum in any way.
Then close the paper transporter again.
12.
To transport the paper web to the preheating saddle:
Press the ADVF button with your right hand.
Feed the paper with your left hand (see
transporter on page
13.
In order to transport the paper web through the fuser station to the paper out-
let:
Continue to press the ADVF button with your right hand.
Feed the paper with your left hand.
14.
To finish inserting the paper web:
Completing the insertion of the paper web - overview on page 140
Inserting paper web in vacuum box and paper transporter
53).
Unlock the loop puller roller
and carefully push it down to
the stop point.
Key control panel on the paper
139
Advertisement
Table of Contents
