Setting the position of the brake roller
Setting the position of the brake roller - overview
Introduction
This adjustment option is used to create a good paper path for difficult papers too,
without requiring heavy force from the guide roller on the paper. The adjustment is
also useful when the adjustment range of the guide roller is insufficient.
Attention:
For most papers, it is not necessary to adjust the brake roller position!
Always try first to remedy the paper path problem with a different setting for the
guide roller. This adjustment option is only recommended for users who already
have a good deal of experience with printing systems.
Overview
You will find information on the following topics:
Paper web runs to the rear in the printer on page 188
Paper web runs to the front in the printer on page 190
The brake roller setting has been lost on page 192
Setting the position of the brake roller - overview
187