Proceed as follows:
[567]
7.
[568]
Caution
Contact between skin and the photoconductor surface may result in skin ail-
ments.
Wear the gloves provided with the photoconductor drum.
8.
Wear the protective gloves provided with the photoconductor drum.
[569]
Important
The surface of the photoconductor drum can be damaged during removal.
Quickly remove the photoconductor drum horizontally from the printing
system to avoid the photoconductor drum touching parts of the printing sys-
tem housing.
[570]
9.
10.
Put down the photoconductor drum.
Removing the photoconductor drum
Loosen the clamping screw and
remove the holding flange.
Grasp the photoconductor drum
by the handle frame and quick-
ly remove from the printing
system in a horizontal direc-
tion.
401