Table of Contents
Advertisement
Fire, disposal
Fire
Observe the following instructions:
As is the case in any fire, toxic gaseous emissions can occur in the event of fire
in the printing system.
Self-contained breathing apparatus must be worn when fighting fire or smoke
emission. Instructions to this effect should be deposited at the fire alarm center
and with the local fire department.
Fire can cause toxic arsenic gas to develop on the photoconductor drum.
These security measures apply particularly in case of fire in locations where a
number of photoconductor drums are stored.
Disposal
Océ operates a system by which expendables and consumables can be returned for
environmentally sound disposal.
Keep all used parts and consumables that are to be returned for disposal for
collection by Service or the contracted shipping company. These will be recycled
or disposed of appropriately by Océ Printing Systems GmbH or a contracted
disposal company.
When disposing of a photoconductor drum, please observe the following:
Before touching the drum, always put on the gloves provided with the drum.
Should flaking of the photosensitive coating on the drum occur, carefully collect
the flakes or fragments of the coating.
Store the photoconductor drum and any flakes of coating in the original drum
packaging.
The drums and coating are hazardous waste and require special disposal. They
should be disposed of by Service or a contracted shipping company. Keep this
carton and its contents out of the reach of children.
Wash your hands afterwards.
Fire, disposal
41
Advertisement
Table of Contents
