Remove charge corotrons
Remove charge corotrons
Attention:
Before replacing the corotrons, please observe the safety directives (see
Replacing the corotrons - overview on page
Note:
This section does not apply for error message "EM096001 'Charge corotron voltage
too low'" (see
To remove the charge corotrons
[197]
Proceed as follows:
[490]
1.
[491]
2.
3.
Install charge corotrons on page 363
362
Chapter 9 Replacing expendables
Remove torn charge corotron on page
360).
364).
Pull out the handle of the coro-
tron mounting and push away
from the PC drum.
Remove the corotron cartridges
individually.