Replacing the active filter
Replacing the active filter - overview
Caution:
The components in the fuser station reach a surface temperature of
approximately 230
touch any parts behind the safety covers (see
on page
33). Wear heat protection gloves when working with fuser station
components.
Note:
Keep used active filter ready for collection by service or the contracted shipping
company.
Overview
The printing system detects the end of the active filter's service life automatically and
displays a warning on the operator panel.
Proceed as follows when replacing the active filter:
Remove active filter on page 346
Insert active filter on page 348
o
C. Touching the components can cause burns. Do not
Replacing the active filter - overview
Warning and information signs
345