Table of Contents
Advertisement
Proceed as follows:
[540]
9.
[541]
Caution
During operation, the heating element reaches a surface temperature of ap-
proximately 230
Allow the old heating element to cool down before disposal.
[542]
10.
Result
As soon as the heating element has been removed, it is possible to continue with
Remove fuser roller on page
Preparing to replace the fuser roller and removing the heating element
o
C. Touching the components can cause burns.
390.
Release the locking mechanism
of the heating element by lifting
it and carefully pull the heating
element out of the roller open-
ing.
If the front heating element
connector plug begins to catch,
slightly turn the heating ele-
ment back and forth on its own
axis during removal.
Place the heating element in the
designated stacker opening and
allow it to cool down for at least
30 minutes.
389
Advertisement
Table of Contents
