Table of Contents
Advertisement
Preparations for removing the developer station
Caution:
Heavy weight:
Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) and
the correct functioning of the locks on the replacement cart.
Hot surfaces
After a longer period of printing, the motor of the developer station may be
hot. Do not touch the motor.
Attention:
Danger of damage
Bear in mind the width and height of the replacement cart when moving it.
Preparing to remove the developer station
[119]
Proceed as follows:
1.
Open the left and right doors at the front of the printing system.
[264]
2.
Preparations for removing the developer station
Open the door in front of the
photoconductor drum:
Pull the lever forward.
219
Advertisement
Table of Contents
