Table of Contents
Advertisement
Replace fuser roller
Replace fuser roller
Note:
Depending on the selected configuration, the fuser rollers listed for installation are
the only ones permitted for this configuration.
To replace the fuser roller
[130]
Proceed as follows:
1.
The list with the work steps for replacing the fuse roller is displayed in the
right half of the window:
[311]
The steps in the list must be followed in sequence.
Detailed information on replacing the fuser roller:
Replacing the fuser roller - overview on page 385
Information on the icons displayed on the operator panel under 'Steps' can be
found under
2.
Click on the 'OK' button to complete the fuser roller replacement.
3.
Complete conversion on page 245
244
Chapter 6 Operating the printing system
Explanation of icons on page
118.
Advertisement
Table of Contents
