Table of Contents
Advertisement
Paper guide for front-side printing
Paper guide for front-side printing
To guide the paper web through the inline turn bar for front-side printing
[75]
Proceed as follows:
[177]
1.
[178]
2.
3.
Tighten the knurled screws again.
4.
Insert paper web in the next printing system (see
per web - overview on page
154
Chapter 6 Operating the printing system
Hold the paper in front by the
first fold and with the first and
second page folded up guide
from below through the upper
guide rods via the infeed and
eject rollers between the paper
feed guide washers.
Only when changing the paper
width:
Loosen the four knurled
screws of the left and right
alignment rings on both
guide rods.
Push the alignment ring un-
til the paper lies in the mid-
dle of the infeed roller.
There must be some space
between the paper and the
alignment ring.
127).
Preparing to insert the pa-
Advertisement
Table of Contents
