Remove torn charge corotron
Remove torn charge corotron
Attention:
The nipple on the corotron wire may fall, unnoticed, into the developer station
when removing the charge corotron cartridge. If printing then continues, the
developer station can be irreparably damaged.
When changing the faulty charge corotron cartridge, always check if the nipple
is still on the corotron wire. If the nipple is missing, search for and find it.
To remove a torn charge corotron
[199]
Proceed as follows:
[494]
1.
[495]
2.
364
Chapter 9 Replacing expendables
Pull out the handle of the coro-
tron mounting and push away
from the PC drum.
Remove the corotron cartridges
individually.