Table of Contents
Advertisement
To complete the fuser oil bottle replacement on the operator panel
[170]
Proceed as follows:
1.
On the operator panel, indicate whether a new fuser oil bottle was used:
In both cases, the message on the operator panel is automatically deleted, and
the replacement of the pressure roller is recorded in the 'Consumables history'
menu.
2.
Click the 'OK' button on the operator panel to complete the procedure.
All aggregates of the printing system are inspected (duration around two to
three minutes) before the printing system is switched to the 'Ready' status.
'Yes'
The consumable counter is reset.
'No'
The consumable counter is not reset.
Inserting the fuser oil bottle
323
Advertisement
Table of Contents
