Table of Contents
Advertisement
Install photoconductor drum
Attention:
The surface of the photoconductor drum is extremely sensitive and can be easily
damaged.
Avoid direct exposure to sunlight and do not touch.
Note:
When installing the photoconductor drum, observe the safety directives in the
section
Replacing the photoconductor drum - overview on page
Installing the photoconductor drum
[218]
Proceed as follows:
1.
Grasp the new photoconductor drum by the handle frame and carefully re-
move from the packaging.
2.
Note the "DRUM TYPE:" number specified on the photoconductor drum
packaging.
[572]
Caution
Risk of damage to the cleaning blade.
When inserting the photoconductor drum, ensure that the cleaning blade on
the charge corotron is not damaged.
[573]
3.
Install photoconductor drum
399.
Push in photoconductor drum
to the stop point via the flange
shafts.
403
Advertisement
Table of Contents
