( ) instead. • Océ ColorWave 810 (Océ 01063) • Océ ColorWave 910 (Océ 01063) Depending on the context, the terms; system, machine, and equipment used in the user documentation means the product for which this user documentation is applicable.
Page 4
Safety information (all countries) Warning and caution indicators (machine) The following indicators are used in the machine to warn the user of possible safety risks: WARNING Whenever this label is affixed to parts of the machine that are accessible to the user, a remark can be found in the user documentation, explaining the potential hazard for which the user is warned or cautioned.
Page 5
Safety information (all countries) Power cord WARNING • Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other damage to the power cord. The use of a damaged power cord (exposed core wire, broken wire, for example) could result in a fire or breakdown.
Page 6
Safety information (all countries) Installation WARNING • Make sure that the machine is placed on a level, horizontal surface of sufficient strength. • Do not place this machine on an unstable or tilted surface. • Do not place this machine in a location that is subject to lots of vibrations and shocks. •...
Page 7
Safety information (all countries) Consumables, supplies and maintenance materials WARNING • Do not throw contaminated parts or parts containing toner or ink into an open flame. • Do not leave toner or ink containing or contaminated parts within reach of children. •...
Regulation notices Grounding (Finland; FI, Norway; NO, Sweden; SE and Denmark; DK) • FI: Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan. • NO: Apparatet må tilkoples jordet stikkontact. • SE: Apparaten skall anslutas till jordat uttag. • DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord.
Page 9
Regulation notices Battery labeling (EEA and Switzerland) • This product contains a battery. Please do not remove the battery. If the battery needs replacement, this should be done only by skilled service technicians who are aware of the removal instructions provided by Océ. •...
Page 10
Regulation notices generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service.
Page 11
Energy consumption (all countries) • In order to limit energy consumption during times of non-use the Océ ColorWave 810/910 has a Sleep mode during which the power level is reduced. The value for the Sleep mode is listed in the Product Safety Data Sheet.
You can "http:// download the Safety Data Sheets from the support site of your product at downloads.oce.com" Operating environment (all countries) • The environmental requirements for correct operation of the machine are as follows: Operating temperature (T): 20 °C (68 °F) - 27 °C (81 °F)
User guides, printer drivers and other resources can change without prior notice. To stay up-to- date, you are advised to download the latest resources from: "http://downloads.oce.com" Before you use your product, you must always download the latest safety information for your product: make sure that you read and understand all safety information in the manual entitled 'Safety Guide' .
Need help?
Do you have a question about the ColorWave 810 and is the answer not in the manual?
Questions and answers