Table of Contents
Advertisement
Settings on the operator panel: Paper with/without perforation
Settings on the operator panel: Paper with/without
perforation
Select paper, with or without perforation
[106]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
On the operator panel select:
Menu'VarioStream' 'Configuration''Paper' 'Properties'
3.
4.
Click on the 'Apply' button.
Paper format length for continuous roll paper with cross perforation
[107]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
On the operator panel select:
Menu'VarioStream' 'Configuration''Paper' 'Dimensions'
3.
In area 'Paper length' specify the paper format length (fold clearance) with
the slide control or by an entry in the text field.
4.
Click on the 'Load' button.
196
Chapter 6 Operating the printing system
When using paper with perforation:
Activate checkbox 'Horizontal perforation'.
When using paper without perforation:
Deactivate checkbox 'Horizontal perforation'.
Advertisement
Table of Contents
