Clean The Maintenance Station, Wiper And Clean Wall - Oce Colorado 1640 Operation Manual

Clean the maintenance station, wiper and clean wall

Before you begin
Use Océ Colorado 1640 prescribed:
• Nitrile gloves for handling ink
• Lint free cloths and swabs
• Cleaning liquid (Methyl benzoate)
NOTE
For information on the prescribed maintenance materials, see
maintenance materials on page
CAUTION
Wear the Océ Colorado 1640 prescribed nitrile gloves. You can only wear the gloves for ten
minutes. After ten minutes you must put on new gloves to prevent contact with the ink.
IMPORTANT
Use the prescribed cleaning liquid. Do not use any other cleaners.
Procedure
1. Start the maintenance action via the operator panel. For more information, see
maintenance on page
2. Put on the Océ Colorado 1640 approved nitril gloves.
3. Open the top cover from the media input side.
4. Locate the maintenance station with the wiper and the clean wall on the right hand side.
5. Take a lint free cloth and clean the wiper until all residue ink is gone.
If necessary, dampen a swab with the cleaning liquid to remove any remaining ink.
CAUTION
Be careful to touch, the wiper can be hot.
134.
97.
Clean the maintenance station, wiper and clean wall
List of Océ Colorado 1640
Chapter 5 - Maintain the system
Start manual
99