Paper guide for reverse-side printing
To guide the paper web through the inline turn bar for reverse-side printing
[74]
Proceed as follows:
[169]
1.
[170]
2.
3.
Tighten the knurled screws again.
[171]
4.
Paper guide for reverse-side printing
Hold the paper in front by the
first fold and, with the first and
second page folded up, guide
them from below through the
upper guide rods to the infeed
roller.
Only when changing the paper
width:
Loosen the four knurled
screws of the left and right
alignment rings on both
guide rods.
Push the alignment ring un-
til the paper lies in the mid-
dle of the infeed roller.
There must be some space
between the paper and the
alignment ring.
For > 250 mm paper widths:
Guide the paper directly into
the lower deflection roller.
151