Proceed as follows:
[354]
16.
[355]
17.
[356]
18.
Clean fuser station
Press the opening lever on the
drive unit of the paper feed to
the left and swivel the drive unit
downward by the handle.
Press the opening lever on the
saddle roller forwards and care-
fully swivel down the roller
saddle.
Turn pressure roller by hand
and check visually for visible
damage, such as scratches,
loosened coating or blistering
on the surface.
Replace the pressure roller if
damaged (see
Replacing the
pressure roller - overview on
page
351).
267