Table of Contents
Advertisement
Fill developer
Proceed as follows:
10.
Click the 'OK' button on the operator panel to start the filling process.
Please wait until the filling process is complete and the developer station is
filled with developer.
11.
Check the hose to see if the developer bottle is completely empty.
To complete the filling process
[165]
Proceed as follows:
[427]
1.
[428]
2.
316
Chapter 8 Replacing consumables
If the developer bottle is not completely empty, restart the filling proc-
ess. To do this, click on the 'Yes' button on the operator panel.
If the developer bottle has already been completely emptied, click the
'No' button.
Unhinge the cage with the de-
veloper bottle and turn.
Remove the tube end from the
developer opening and remove
the funnel from the developer
bottle.
Advertisement
Table of Contents
