Table of Contents
Advertisement
Proceed as follows:
[611]
4.
5.
Open the packaging of the new dirt bin, taking care not to damage it.
6.
Remove new dirt bin from the packaging and place on surface.
[612]
Caution
During operation, the components in the fuser station reach a surface tem-
perature of approximately 230
burns.
Wear heat protection gloves.
7.
Put on heat protection gloves.
[613]
8.
[614]
Caution
Spilled oil can cause danger of slipping.
Wipe away any spilled oil with a paper towel.
9.
Remove visible oil traces on the swiveled oiling unit with a paper towel.
10.
Install dirt bin on page 426
Press against the pressure pin
and swivel the dirt bin out-
wards.
o
C. Touching the components can cause
Remove the old dirt bin,
filled with oil and dirt, insert
into the packaging, close
and make ready for collec-
tion.
Remove soaked felt strips.
Remove dirt bin
425
Advertisement
Table of Contents
